+ Reply to Thread
Results 1 to 3 of 3
  1. #1
    Join Date
    Sep 2018
    Posts
    21
    Thanked: 0

    Running Atomiswave on a standard resolution cabinet

    I know this is very simple, but it seems many people interested in AW are unsure if they will be able to run it in their existing cabinet. The answer is YES, most likely. The AW motherboard has a DIP switch to toggle between standard resolution and high resolution. If your cabinet has a standard monitor, just flip the switch to the corresponding resolution and you're good to go.

  2. #2
    Join Date
    Sep 2018
    Posts
    21
    Thanked: 0
    Remember that the AW is usually too bright in most regular JAMMA cabs in low-res mode, so if your cab has a brightness control you'll probably have to use it.

  3. #3
    Join Date
    Sep 2018
    Posts
    21
    Thanked: 0
    Oh, yes. Good point. The AW is VERY bright. Infact I had to turn my RGB settings way down as well. Thanks!

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may post new threads
  • You may post replies
  • You may not post attachments
  • You may not edit your posts
  •